KING GATE STYLO K4 REMOTE CONTROL UNIT , 4 buttons KingGates Transmitter Unit

Free Standard Delivery Australia-wide only 

Includes 

• STYLO K4  , 4 buttons KingGates Transmitter 
• Battery ,3 V 
• Coding instruction manual

Warranty -  01 year manufacturer's warranty

https://www.ada-aust.com/assets/files/KINGgates_Stylo4k_EN1.pdf

The King Gates Stylo 4K is an Inspired by the automobile sector, Stylo 4K is a tough radio remote control with a high-impact appearance, thanks to its chromed metal structure.four channel rolling code 433.92 MHz radio remote control with an attractive design.  The four channel 4K version has a particularly tough chromed metal case.

King Gates Instructions

Before Coding 1. Read this page fully

2. If the remote operates more than one item, only the items you are coding, should be powered and working. Please note that systems with battery backup kits are always powered. You may need a technician to assist with coding.

3. Have both, a currently working (old) and the NEW remote, ready.

4. Stand approximately 5 metres from the gate for safety.

5. The gate must be fully closed.

6. There are 2 programming procedures.

•  of these will be suitable for this gate. Procedure

1.  Take the NEW remote and press a button and hold it pressed for 6 seconds then release
2. . Take the currently working (OLD) remote and

a. Press, release, wait for the red flashing indicator to turn off

b. Press, release, wait for the red flashing indicator to turn off

c. Press, release, wait for the red flashing indicator to turn off

3. Within the next 5 seconds. Take the NEW remote, and shortly press the desired button again.

4. The new remote is now programmed. Test the remote. Repeat this process if it is not working.

Procedure-2

2 1. Take a working (OLD) remote control unit and press the large 2 buttons together simultaneously for 6 seconds.

2.2. Within a few seconds take a NEW remote and press the 2 large buttons together simultaneously

2.3. The new remote is now programmed. Test the remote. Repeat this process if it is not working.